LIGHTING POLES PRODUCTION
AND ELECTRICAL EQUIPMENT

CURVED CONICAL POLES HSP ROLLED

The conical poles rolled steel products are HSP S275JOH (UNI EN 10219) with the lamination process and without any longitudinal welding.
For the type of deformation that is applied, or a slow hot deformation of the material with the conveying of the same to vary the geometry inside the pole and not stretched as other hot work foresee, the thickness of the pile grows gradually which is reached the top of the same.
The product is particularly suitable for the most demanding designers and always aimed at the search for new forms.

The posts are available in classic shapes such as:
- Conical / tapered with a (angle) variable
- Tapered / tapered sections with lengths and diameters to customer's drawing
-a customer's design
(required minimum quantity of production)
Subsequently, the straight poles are subjected to cold bending with special templates. Through the 'action of an electric organ, they will assume the bending required.
On them is expected to be hot dip galvanized in accordance with the UNI EN ISO 1461.
Our products are certified according to EN40-5 from IGQ and comply with all standards of control typical of an ISO 9001 certified company.

work poles up to 6 meters in height

or insert pocket-earth place to 600mm from pole base
132x38-loop cables placed at 350mm
132x38-door mail slot to 1500mm from bottom of the pole in the center hole

work poles taller than 6 m

pocket-grounding pole placed at 900mm from base
186x45-loop cables placed at 600mm from bottom of the pole in the center hole
186x45-door mail slot to 1800mm from bottom of the pole in the center hole

All poles are supplied with label and / or CE marking.

At the request of the customer performing special processing to the posts:

-Door cur flush with pole
-Square or circular base plate. Dimensions and thickness on request according to the type of application and type of pole
-Coupling with decorative reduction rings
-drip-ring or stop
-Reinforced door slot where necessary
-welded steel sleeve or shrink sleeve applied
-adjustable arm or flange

At the request of the customer the finish of the pole can 'be powder coated according to RAL international scale.