LIGHTING POLES PRODUCTION
AND ELECTRICAL EQUIPMENT

Posts Special Tapered (Diameter Thickness And Non-Standard)


The tapered poles for special installations by us are suitable structures to loads on top of pole of particular severity.
Diameters are used for example 244/273/323 Thickness of 5/5.5/6 mm in such a way that the pole to comply with the strength characteristics required.
Our poles are made of longitudinally welded tubes by induction (in sheet 'steel S235 JRH - conforms to UNI EN 10219).
The tubes, diametrically different, are joined together by circumferential welding in correspondence of tapers.
For each pole performs the following operations:
- Cable entry slot;
- Application of the plate grounded (or thread insert).

The galvanizing is carried out by immersion of materials in tanks of molten zinc at a temperature of 450 ° C, where the thickness of the zinc coating and 'in accordance with the UNI EN ISO 1461.

Our poles are manufactured in compliance with the UNI EN 40/5 and other related rules:
- Dimensions and tolerances: EN 40/2;
- Materials: EN 40/5;
- Specification for characteristic loads: EN 40/3/1;
- Verification by calculation: EN 40/3/3;
- Surface protection: EN 40/4;

Each pole also comes equipped with an adhesive label EC.

At the request of the customer can be made of steel piles with different characteristics:
- S275 JR (Fe430)
- S355 JR (Fe510B)