HOT DIP GALVANIZED EARTH GROUND RODS

IEC French Standard (International Electrotechnical Commission) 60364-5-54 transposed into Italy CEI 64-8/54

Grounding protection is mandatory in all civil and industrial facilities.

To make a grounding system, must be used the groundrod, cross-shaped, square or cylindrical, usually of more than 1 meter length, are required, on which the ground cable is bolted to the top.

Ground rods are also extensible elements, which come into the ground, make up the grounding system, creating an electrical connection and ground current dispersion.

The groundrod can be horizontal and consists of flat or round conductors, or vertically inclined in the ground, by picks or pegs of earth, also known as ground picket.

These ground rods can be both galvanized and copper plated in accordance with CEI 11-1 CEI 64-8 EN62305-3.

Hot dip galvanized square Ø14-16 CEI 7-6

The "quadrile" groundrod made of S275JR + AR steel in accordance with EN 10025-2 / 2004 3.1 EN 10204, can be produced of mt 1-1,5-2-2,5, according to customer's request.

It is endowed with a tip at one end, and the other with a cut, as a mechanical beat.

It can be fitted with its galvanized universal MF16 clamp with galvanized M8x25 screw.

Hot dip galvanized Ø16 ground rod in accordance to CEI 7-6

The cylindrical ground rod made of S275JR round full steel in accordance with EN10025-2 / 2004 EN10204, Ø 16 can be produced of mt, 1-1,5-2, -2,5, according to customer's request.

It is endowed with a tip at one end, and the other with a cut, as a mechanical beat.

It can be fitted with its galvanized universal MF16 clamp with galvanized M8x25 screw.